Ultrasonic Fuel Injector Cleaner & Tester Support 110V/220V With English Panel

Why have to clean injector?

* When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls.
* Gasoline is easy to volatile, but wax and varnish were stayed.
* Heat these wax and varnish day after day,they will be changed into hard coke.
* The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel.

Fuel Injector Tester is an instrument which can test & measure the injectors' droplet formation, atomization, efficiency and fuel delivery. All are visually and / or physically checked and tested as a starting point, rather than as a last resort. When problems are found, the injectors are cleaned in the supplied ultrasonic cleaning bath. The injectors mount in a special plate and are connected to the tester in order to operate them at high frequency during cleaning. After cleaning, the rubber sealing rings, plastic protection caps and filter baskets can be replaced (as applicable) before re-testing to ensure all the injectors are performing as a perfectly matched, balanced set.

Installation :

1. All equipment are delivered with 3 pin electrical cable, use the ground connection for equipment and operator protection.

2. Verify that test liquid level at 2.5L or at least between the range of two red lines. For a new machine, please fill 2.0~ 2.5L testing liquid. Never fill up the tank at its maximum capacity.

3. Fill up the ultrasonic cleaning tank with the liquid for injector cleaning. Liquid level should not reach 3 cm below the tank edge, in order to avoid liquid overflow on device. Take special care not to drop liquid on the equipment when filling up or emptying the tank.

Product specification

Feature:

【INTEGRATED CONTROL PANEL】- In the control panel, there are several models for your option, along with LED display. Through the clear menu,your operation can be very easy and simple.

【GLASS TUBES & PRESSURE METER】- This auto fuel injector cleaner has 4 glass digital display tubes and a pressure meter which provides you precision in your test and makes your operation easy.

【DURABLE OIL FEED PIPE】- The pipe of this machine features high strength and corrosion protection of this pipe is ensured , and make the oil feed pipe more durable. You don't need to worry about the pipe.

【ULTRASONIC CLEANING TROUGH 】- There is a built-in ultrasonic cleaning trough in the fuel injector cleaner. It can clean several injectors and remove the carbon deposits on the injector.

【STANDARD ACCESSORIES】- The fuel injector cleaner has standard accessories kit. It includes various adaptors and couplers and they can facilitates cleaning on the injectors on vehicle and makes you use it more conveniently.

Wonderfu is the leading factory producing AC Recovery Machine, Dry Sanding Machine, N2 Inflator and Injector Tester and Cleaner.
We have 22 years experience specializing in automotive garage equipment production.

We have a strong research and development team and a strict system for quality control. Most of our team members has more than 15 years experience in this field. Every machine will be detected before shipping. And we provide one year's warranty to all of our products.

We have obtained CE certificates for all of our products. And our products have been authorized to be used in 4S service centers like GM, Toyota, Volkswagen, Ford, Honda and Peugeot in China. We have exported to more than 20 countries or area in recent years and have received much applause from our distributors.