Car Fuel Injector Clean Machine Testers 2 In 1 Common Rail Injectors Tester

Being a client-centric organization, we are engaged in offering an excellent quality Fuel Injector Cleaner And Tester. The equipment provided by us is to examine the performance and accurate setting of the fuel injection pump. Our vendor's dexterous team of professionals manufacture this test bench using quality approved components and sophisticated technology in tandem with set industry norms. The Fuel Injector Cleaner And Tester provided by us is highly applauded in the global market owing to its qualitative attributes like accuracy, optimum functionality, hassle free performance, and sturdiness.

Installation :

1. All equipment are delivered with 3 pin electrical cable, use the ground connection for equipment and operator protection.

2. Verify that test liquid level at 2.5L or at least between the range of two red lines. For a new machine, please fill 2.0~ 2.5L testing liquid. Never fill up the tank at its maximum capacity.

3. Fill up the ultrasonic cleaning tank with the liquid for injector cleaning. Liquid level should not reach 3 cm below the tank edge, in order to avoid liquid overflow on device. Take special care not to drop liquid on the equipment when filling up or emptying the tank.

Product specification

Feature

Ultrasonic cleaning: A most advance method to clean injector in most efficient way. This process removes carbon deposit from injector in most efficient way.
Uniformity/Sprayability test: This test is used to test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight.
Leakage test: this test is used to test the sealing and dribbling conditions of injectors under system pressure with help of in built digital fuel pressure control.
Injecting flow test: It is a test to check the injected amount of the injector in 15 seconds of constant injection, from this result technician can know about clogging or wear of Injector.
Auto test: To test injectors by simulating different working conditions.
vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Also supported with fuel drain system by which just pressing one button drain all cleaning fluid.

Wonderfu is the leading factory producing AC Recovery Machine, Dry Sanding Machine, N2 Inflator and Injector Tester and Cleaner.
We have 22 years experience specializing in automotive garage equipment production.

We have a strong research and development team and a strict system for quality control. Most of our team members has more than 15 years experience in this field. Every machine will be detected before shipping. And we provide one year's warranty to all of our products.

We have obtained CE certificates for all of our products. And our products have been authorized to be used in 4S service centers like GM, Toyota, Volkswagen, Ford, Honda and Peugeot in China. We have exported to more than 20 countries or area in recent years and have received much applause from our distributors.